|PA-6BT HOTSPOT||Powered Hotspot: Bluetooth. Compact 170 watt PA/Personal Monitor. 2-way system, 1 x 6.5″: LF neodymium woofer, 1 x HF 1.5″ neodymium tweeter, Class D power amp; freq response: 80Hz-18kHz, three band EQ, two XLR/1/4″ combo inputs, pass thru/splitter on each channel, 1/8″ stereo input on Chan 2, line out, integrated handle, weighs 2.9 kilos||£344.58|
|HS7 HOTSPOT||Unpowered, 2 x 5″ neo FerroFluid drivers, 2 x Speakon/1/4″ combo parallel inputs, vol control, , mic stand mountable, 150Hz-18kHz, 200w continuous, 92dB sens/126 max, weight 2 kilos, 19 x 30 x 16 cm||£181.14|
|MSPA5 MICROSPOT – new||Powered Microspot, 100 watts, 1 x 5″, 160Hz to 20kHz, 88dB sens. Inputs: 1 bal 1/4″, one bal XLR, one 1/8″ stereo summing. 2 band eq, compressor, +48V phantom, 20 db pad, includes stand/wall mount bracket||£271.86|
|MS5 MICROSPOT||Unpowered Microspot, 100 watts RMS, 150Hz – 15kHz, SPL 113dB, 1 x 5″ ceramic 16 ohm driver, 2 parallel input jacks, 7 position vol control, includes mic/wall bracket, SA-1 safety cable, rubber feet, Hardware, 16 x 15 x 19 cm, 1.82 kilos||£97.15|
|Active 25 watts, 1 x 3″ speaker, 150-17kHz, 2 band eq, 1 x XLR/Jack combi in, 1/8th summing stereo in, 20dB pad, SPL 101.5dB, 24v phantom, compressor, power and signal leds, includes psu & stand mount bracket, 127mm x 108mm x 114mm, 0.8 Kilos||£166.94|
|MBA||Mic boom adapter, mounts on top of the PA6S, PA6SR,and HS7, allows most mic booms (3/8″ & 1/2″) to be mounted on top of the unit.||£12.10|
|SAYB10-0||Wall mount yoke bracket kit for PA6S, PA6SR, & HS7, black||£29.98|
|SAYBSA10-0||Stand mount yoke bracket kit for PA6S, PA6SR, & HS7, black or white||£29.98|
|SM-BS||Anti-shock microphone base, accepts XLR gooseneck, XLR output, 12×12.5x4cm, 1.2 Kilos, zinc die-cast. Also with switch/phantom||£69.83|
|LSR38 LIFE SAVER||Unique doughnut-shaped sand/water-filled bag to stabilise mic/speaker/lighting stands. Won’t slide off, weighs 17.23 kg when filled with sand (not included!) and 9.97 kg filled with water. Particularly effective when used to stabilize a mic stand with a boom.||£42.72|
|SDB40 SADDLE BAG||Saddlebag-shaped (dual wing) durable reinforced vinyl bag to stabilise speaker/keyboard/lighting/camera stands that may be top-heavy. Fill with water or sand. Also great as a long mic boom counterweight in a studio.||£53.83|
|MST-C60 / C90 STANDFORMER||A mic stand that transforms from a standard straight mic stand to a fully adjustable boom stand. 5 disc, anti-slip cam, supports 1kg. Boom stores inside upright.
C60 = 63″ tall straight or 41″ tripod with 23″ boom. C90 = 93″ tall or 62″ tripod with 30″ boom.
|GCPTS Cricket||The ultimate Polarity/Continuity test set, easy to use 2 module send-and-receive, internal mic in receiver, internal speaker in send unit, tests balanced and unbalanced cables up to 610 metres (2,000 feet) in length, drives speakers directly, includes 2 x 9v batteries. Save hours of troubleshooting.||£132.89|
|SM-BS||Antishock microphone base, die-cast zinc, accepts XLR Gooseneck, XLR Output, 4.72″ x 4.9″ x 1.57″, 1.2Kilos||£77.18|
|CM-150 CheckMate||Handheld SPL meter – stay ahead of the Noise Police! Battery-powered, 30-130dB range, resolution 0.1dB, backlit display, RS-232 Interface, IEC 651 Type II, ANSI S1.4 Type II. Includes carrying case, calibration screwdriver, manual, 9-volt battery and windscreen.||£240.91|